16" 300 BLACKOUT Nitride Barrel - 12" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly 16" 300 BLACKOUT Nitride Barrel - 12" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly
SKU: UA30B16NI08HC24C_12ML00_A2
AR15parts.com

16" 300 BLACKOUT Nitride Barrel - 12" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly

$420.00
$325.00
(You save $95.00)

16" 300 BLACKOUT Nitride Barrel AR15 Rifle Upper Assembly with 12" Rail and A2 Flash Hider

The 300 AAC Blackout was designed to achieve energies like the 7.62x39 Soviet in an AR16 while using standard AR15 magazines at their full capacity. The 7.62 Soviet's cartridge taper prevented reliable feeding in AR magazines and created wear on the bolt. From the 14.5in barrel of the AR15, the 556 round has an effective point target range of 500 yards. The bullet has significant drop, drift, and energy loss at that distance. From a 16in barrel, a 125gr 300 BLK round has a lower velocity and similar bullet drop and drift at shorter distances. However, it has the same amount of energy at 700 yards that the 556 has at 500 yards. In terms of hit probability, the Blackout has an effective range of 450 yards. From a 9in barrel, the 125 gr BLK round has the same muzzle energy as the 556 from a AR15, and 5 percent more energy at 440 yards. In comparison with 7.62×39mm rounds, 300 BLK rounds with varying loads have a better ballistics and more energy out of similar length barrels.

Specifictions:

  • 16" 300 BLACKOUT 4150 Chrome Moly Mid-Weight Contour Nitride Barrel with 1x8 Twist and 5/8x24 Threads.
  • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
  • 12" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
  • 0.750" Low Profile Gas Block.
  • Carbine Length Gas System.
  • Mil-Spec A2 Flash Hider with crush washer.

Options:

  • AR15parts will customize (to your specificaions in the drop down menu) your AR15 upper with the Rail Type (M-LOK or KEYMOD), a Magazine or two, one of our High Quality Bolt Carrier Groups, and your choice of 5 different Charging Handles.

 

This upper assembly will fit all standard AR15 lower receivers.

This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

Full Description
Current Stock: 164
Rail Type *
Muzzle Device *
Magazine
Bolt Carrier Group
Charging Handle
Qty
  • Description

    16" 300 BLACKOUT Nitride Barrel AR15 Rifle Upper Assembly with 12" Rail and A2 Flash Hider

    The 300 AAC Blackout was designed to achieve energies like the 7.62x39 Soviet in an AR16 while using standard AR15 magazines at their full capacity. The 7.62 Soviet's cartridge taper prevented reliable feeding in AR magazines and created wear on the bolt. From the 14.5in barrel of the AR15, the 556 round has an effective point target range of 500 yards. The bullet has significant drop, drift, and energy loss at that distance. From a 16in barrel, a 125gr 300 BLK round has a lower velocity and similar bullet drop and drift at shorter distances. However, it has the same amount of energy at 700 yards that the 556 has at 500 yards. In terms of hit probability, the Blackout has an effective range of 450 yards. From a 9in barrel, the 125 gr BLK round has the same muzzle energy as the 556 from a AR15, and 5 percent more energy at 440 yards. In comparison with 7.62×39mm rounds, 300 BLK rounds with varying loads have a better ballistics and more energy out of similar length barrels.

    Specifictions:

    • 16" 300 BLACKOUT 4150 Chrome Moly Mid-Weight Contour Nitride Barrel with 1x8 Twist and 5/8x24 Threads.
    • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
    • 12" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
    • 0.750" Low Profile Gas Block.
    • Carbine Length Gas System.
    • Mil-Spec A2 Flash Hider with crush washer.

    Options:

    • AR15parts will customize (to your specificaions in the drop down menu) your AR15 upper with the Rail Type (M-LOK or KEYMOD), a Magazine or two, one of our High Quality Bolt Carrier Groups, and your choice of 5 different Charging Handles.

     

    This upper assembly will fit all standard AR15 lower receivers.

    This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

    You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock: 164
    SKU: UA30B16NI08HC24C_12ML00_A2
    Availability: Usually Ships in 24 Hours
    Old SKU: UA30B16NIHC_12ML00_A2