18" 6.5 GRENDEL Stainless Heavy Barrel - 15" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly 18" 6.5 GRENDEL Stainless Heavy Barrel - 15" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly 18" 6.5 GRENDEL Stainless Heavy Barrel 18" 6.5 GRENDEL Stainless Heavy Barrel
SKU: UA65G18SS08HC24M_15ML00_A2
Shaw

18" 6.5 GRENDEL Stainless Heavy Barrel - 15" Rail - A2 Flash Hider - AR15 Upper Assembly

$500.00
$405.00
(You save $95.00)

18" 6.5 GRENDEL Stainless Heavy Barrel AR15 Upper Assembly with 15" Rail and A2 Flash Hider

The 6.5mm Grendel cartridge was first unveiled in May 2003 at the Blackwater Training Facility, where it remained supersonic at 1200 yard range.  The goal of the 6.5mm Grendel design was to create an effective STANAG magazine-length cartridge for the AR15 platform that could reach 200–800 yd and surpass the performance of the native 556 NATO cartridge. Firing Factory loaded ammunition with bullets ranging from 90 to 129 grains (5.8 to 8.4 g), its muzzle velocity varies from 2,500 ft/s (760 m/s) with 129- and 130-grain (8.4 g) bullets to 2,900 ft/s (880 m/s) with 90 gr (5.8 g) bullets (similar in velocity to a 77-grain (5.0 g) 5.56 mm round). 

Specifications:

  • 18" 6.5 Grendel 416R Stainless Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads. The chamber of this barrel conforms to SAAMI specs for 6.5 Grendel. The barrel is machined for a 0.136" bolt face depth AKA a Type-2 6.5 Grendel bolt. The bolt carrier group available for purchase with this upper assembly has a Type-2 bolt matched to this barrel
  • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2
  • 15" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2
  • 0.750" Low Profile Gas Block
  • Mid Length Gas System
  • Mil-Spec A2 Flash Hider with crush washer

This upper assembly will fit all standard AR15 lower receivers.

This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

Full Description
Current Stock:
Rail Type *
Muzzle Device (5/8x24) *
Magazine
Bolt Carrier Group
Charging Handle
Qty
  • Description

    18" 6.5 GRENDEL Stainless Heavy Barrel AR15 Upper Assembly with 15" Rail and A2 Flash Hider

    The 6.5mm Grendel cartridge was first unveiled in May 2003 at the Blackwater Training Facility, where it remained supersonic at 1200 yard range.  The goal of the 6.5mm Grendel design was to create an effective STANAG magazine-length cartridge for the AR15 platform that could reach 200–800 yd and surpass the performance of the native 556 NATO cartridge. Firing Factory loaded ammunition with bullets ranging from 90 to 129 grains (5.8 to 8.4 g), its muzzle velocity varies from 2,500 ft/s (760 m/s) with 129- and 130-grain (8.4 g) bullets to 2,900 ft/s (880 m/s) with 90 gr (5.8 g) bullets (similar in velocity to a 77-grain (5.0 g) 5.56 mm round). 

    Specifications:

    • 18" 6.5 Grendel 416R Stainless Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads. The chamber of this barrel conforms to SAAMI specs for 6.5 Grendel. The barrel is machined for a 0.136" bolt face depth AKA a Type-2 6.5 Grendel bolt. The bolt carrier group available for purchase with this upper assembly has a Type-2 bolt matched to this barrel
    • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2
    • 15" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2
    • 0.750" Low Profile Gas Block
    • Mid Length Gas System
    • Mil-Spec A2 Flash Hider with crush washer

    This upper assembly will fit all standard AR15 lower receivers.

    This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

    You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

  • Reviews

    Reviews

    Larry Jeffrey

    6.8 Match Grade Upper

    Ordered on Sunday received Friday. Fit and finish is beautiful, quality outstanding. Trip to the range it performed as expected. Thank you ar15part.com !
    Mike

    18" 6.5 Grendal upper

    Don't let the price fool you. The upper fit and finish is top notch. The same goes for the barrel. It fit the lower like a glove. Haven't had it on the range yet if there are any problems I will update review.
  • Details

    Details

    Current Stock:
    SKU: UA65G18SS08HC24M_15ML00_A2
    Availability: Usually Ships in 24 Hours
    Old SKU: 186.5GSSU1x8KMEXRL