7.5" 7.62x39 Parkerized Heavy Barrel AR15 Upper Assembly with 9" Rail and Micro Slim Cone Flash Can
The 7.62×39mm round is a rimless bottlenecked intermediate cartridge of Soviet origin that was designed during World War II. The cartridge is used by both militaries and civilians alike, due to the worldwide proliferation of the Soviet SKS and AK-47 pattern rifles, as well as RPD and RPK light machine guns. Since approximately 1990, the 7.62×39mm cartridge has seen some use in hunting arms in the U.S. for hunting game up to the size of whitetail deer, as it is slightly more powerful than the 30-30 Winchester round, and has a similar ballistic profile. The lower cost and high availability of military surplus ammunition makes this cartridge attractive for many civilian hunters and plinkers.
- 7.5" 7.62x39 4150 Chrome Moly Parkerized Heavy Contour Barrel with 1x10 Twist and 5/8x24 Threads
- Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2
- 9" M-LOK Narrow Profile Free Float Rail machined from 6061 T6 aluminum Very comfortable and very light weight. M-LOK attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2
- 0.750" Low Profile Gas Block
- Pistol Length Gas System
- Micro Slim Cone Flash Can with crush washer
This upper assembly will fit all standard AR15 lower receivers.
This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.
You are responsible for knowing federal, state and local laws applicable to this item. AR15Part.com reserves the right to not ship to addresses where it may not be legal to own this item.
ReviewsMatthewI bought this upper to replace a cheaper competitor's similar product. I have a lever action 30-30 I have kept as a truck gun for decades. Here we are in 2021 and Grampa Joe has convinced me I desperately need to upgrade. I'm told the 7.62x39 has similar ballistics to the 30-30. So, I mated this to a 17 Designs folding lower with a FAB folding grip, and SBA3 brace. It packs down into a neat little package I can fit out of the way in the truck, but get to quickly if I got something/someone bothering the animals. More specifically, I needed a gun I could count on. The competitor's lower was advertised as being designed to handle steel cased, cheap Russian ammo. It broke two extractors in the first 200 rounds, had countless misfeeds, extraction failures, feed jams. The only good thing about it was the guarantee and the return policy. It had every issue the 7.62x39 is infamous for on the AR-15 platform I was hesitant to purchase another. This upper arrived quickly enough, was packaged well, and arrived in new condition. During the initial cleaning of the weapon (which did not have a lot of oil/grease on it) the only flaw discovered was a slight misalignment of the handguard. It does not affect my Red dot alignment, but my BUIS are cranked nearly all the way to one side. This upper specifically states that it is NOT guaranteed when used with steel cased ammo. I'm past the guarantee date anyway. I paired it with the Nitride BCG, but replaced the firing pin with a Black Rifle "Enhanced pin." I had two light strikes in the first mag through this upper. I put two hundred rounds through it after that, and it cycled without a hitch. I'm confident it will keep on going for a good while. The flash can is a nice addition. Firing this is less noisy/loud than my 5.56 with a muzzle brake. Overall, it appears to be a solid, dependable upper. It shoots decent groups for me out to two hundred yards, which is about 100 yards further than any shot I expect to have to take with it. So, I'm happy enough with the upper, and would be comfortable buying another.
Leave a Review
DetailsCurrent Stock: 27SKU: UA76275PA10HC24P_09ML00_SCUPC:Availability: Usually Ships in 24 HoursOld SKU: UA76275PA10HC24_09ML00_SC