20" 6.5 CREEDMOOR Stainless Fluted Barrel - 15" M-LOK Rail   Thread Protector -   AR10/LR308  Upper Assembly 20" 6.5 CREEDMOOR Stainless Fluted Barrel - 15" M-LOK Rail   Thread Protector -   AR10/LR308  Upper Assembly 20" 6.5 CREEDMOOR Stainless Fluted Barrel - 15" M-LOK Rail   Thread Protector -   AR10/LR308  Upper Assembly 20" 6.5 CREEDMOOR Stainless Fluted Barrel 20" 6.5 CREEDMOOR Stainless Fluted Barrel
SKU: UA65C20SS08ST24R_15ML00_TP
AR15parts.com

20" 6.5 CREEDMOOR Stainless Fluted Barrel - 15" M-LOK Rail Thread Protector - AR10/LR308 Upper Assembly

$700.00
$525.00
(You save $175.00)
20" 6.5 CREEDMOOR Stainless Straight Fluted Heavy Barrel AR10/308  Upper Assembly with 15" M-LOK Rail and Thread Protector
 
The 6.5mm Creedmoor, designated 6.5 Creedmoor by SAAMI, 6.5 Creedmoor by the C.I.P. or 6.5 CM or 6.5 CRDMR for short, is a centerfire rifle cartridge introduced by Hornady in 2007, developed by Hornady.  The 6.5mm Creedmoor was designed for target shooting at longer ranges.  For some loads, the 6.5mm Creedmoor is capable of duplicating the muzzle velocity or trajectory of the 300 magnum while generating significantly-lower recoil based on lighter projectile weight.  The ability to retain velocity keeps the 6.5mm Creedmoor with 140-grain match bullets in the supersonic range out to around 1,150 yd (1,052 m), while the .308 Winchester with non-ideal for long range use 168-grain match bullets has a supersonic range of about 975 yd.  In October 2017, SOCOM determined 6.5 Creedmoor performed the best, doubling hit-probability at 1,000 yards, increasing effective range by nearly-half, reducing wind drift by a third, with less recoil than 7.62×51mm NATO rounds.
 
Specifications:
  • 20" 6.5 CREEDMOOR 416R Stainless Straight Fluted Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads
  • AR10/LR308 Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2
  • 15" M-LOK Narrow Profile Free Float Rail machined from 6061 T6 aluminum Very comfortable and very light weight. M-LOK attachment points along the entire length at 3, 6, and 9 positions
  • Hard coat anodized MIL-STD 8625 Type 3 Class 2
  • 0.936" Low Profile Gas Block
  • Rifle Length Gas System
  • Stainless Steel Thread Protector

This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to  you with no FFL transfer required.

 You are responsible for knowing federal, state and local laws applicable to this item. AR15Part.com reserves the right to not ship to addresses where it may not be legal to own this item.

 

Full Description
Current Stock: 49
Upper Receiver Pattern *
Muzzle Device (5/8x24) *
Magazine
Bolt Carrier Group
Charging Handle
Qty
  • Description
    20" 6.5 CREEDMOOR Stainless Straight Fluted Heavy Barrel AR10/308  Upper Assembly with 15" M-LOK Rail and Thread Protector
     
    The 6.5mm Creedmoor, designated 6.5 Creedmoor by SAAMI, 6.5 Creedmoor by the C.I.P. or 6.5 CM or 6.5 CRDMR for short, is a centerfire rifle cartridge introduced by Hornady in 2007, developed by Hornady.  The 6.5mm Creedmoor was designed for target shooting at longer ranges.  For some loads, the 6.5mm Creedmoor is capable of duplicating the muzzle velocity or trajectory of the 300 magnum while generating significantly-lower recoil based on lighter projectile weight.  The ability to retain velocity keeps the 6.5mm Creedmoor with 140-grain match bullets in the supersonic range out to around 1,150 yd (1,052 m), while the .308 Winchester with non-ideal for long range use 168-grain match bullets has a supersonic range of about 975 yd.  In October 2017, SOCOM determined 6.5 Creedmoor performed the best, doubling hit-probability at 1,000 yards, increasing effective range by nearly-half, reducing wind drift by a third, with less recoil than 7.62×51mm NATO rounds.
     
    Specifications:
    • 20" 6.5 CREEDMOOR 416R Stainless Straight Fluted Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads
    • AR10/LR308 Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2
    • 15" M-LOK Narrow Profile Free Float Rail machined from 6061 T6 aluminum Very comfortable and very light weight. M-LOK attachment points along the entire length at 3, 6, and 9 positions
    • Hard coat anodized MIL-STD 8625 Type 3 Class 2
    • 0.936" Low Profile Gas Block
    • Rifle Length Gas System
    • Stainless Steel Thread Protector

    This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to  you with no FFL transfer required.

     You are responsible for knowing federal, state and local laws applicable to this item. AR15Part.com reserves the right to not ship to addresses where it may not be legal to own this item.

     

  • Reviews

    Reviews

    James Arnold

    6.5 Creedmore Upper

    Fast Shipping
    Joseph McClain

    Joe

    I slapped this bad boy on my Aero Precision lower and let me tell you! Pictures don’t do it’s justice this is a great upper especially for the price ! Will definitely be ordering another !
    Josh Cade

    Very high quality

    I am very pleased with my purchase and will definitely be doing more business down the road
    ROBERT PLEASANTS

    6.5 CREEDMOOR COMPLETE UPPER RECEIVER

    I’m extremely happy with the quality of workmanship you guys put into my upper.and I’m really happy with how quick my order was processed and shipped.i just got my lower today.but that’s another story.but with that being said I have no doubts from your customer service that I will be just as pleased with my purchase.thank you guys for the great experience and I’m looking forward to my next purchase sincerely ROBERT
    Dustin Williams

    Shipping

    Shipping took forever I paid the 20 dollars for 2-3 day shipping took a week to receive. Y’all might start using ups instead of usps.
    Gus Charlier

    Awesome

    The upper I ordered is awesome. I ordered on a Friday afternoon and received my upper the next Thursday. This company has great service. I will be ordering from from these people again.
    Arthur Andy Kessner

    6.5 upper

    Easy to order, and someone actually answers questions when asked! That’s something to Crow Abou!
    James

    Have not shot it yet

    The product arrived fast and was pack and protected for shipment. The quality looks great, fit and finish seems spot on. Looking forward to shooting the upper.
  • Details

    Details

    Current Stock: 49
    SKU: UA65C20SS08ST24R_15ML00_TP
    Availability: Usually Ships in 24 Hours
    Old SKU: 2065CSSSFBBL1x815EXRLMLR