20" 6.8 SPC II Stainless Barrel - 15" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly 20" 6.8 SPC II Stainless Barrel - 15" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly
SKU: UA68S20SS11HC24R_15ML00_A2
AR15parts.com

20" 6.8 SPC II Stainless Barrel - 15" Rail - A2 Flash Hider - AR15 Rifle Upper Assembly

$500.00
$400.00
(You save $100.00)

20" 6.8 SPC Stainless Heavy Contour Barrel AR15 Rifle Upper Assembly with 15" Rail and A2 Flash Hider

The 6.8mm SPC was designed to address the deficiencies of the ballistics of the 556 NATO cartridge currently in service with the armed forces of all NATO-aligned countries.  The cartridge was the result of the Enhanced Rifle Cartridge Program. The 6.8 SPC was initially developed by Master Sergeant Steve Holland and Chris Murray, a United States Army Marksmanship Unit gunsmith, to offer superior downrange lethality over the 5.56 NATO/.223 Remington in an M16-pattern service rifle with minimal loss of magazine capacity and a negligible increase in recoil. The goal was to create a cartridge that would bridge the gap between 5.56 mm and 7.62mm.

Specifications:

  • 20" 6.8 SPC 416R Stainless Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads. The chamber of this barrel conforms to SAAMI specs for 6.8 SPC. The barrel is machined for a 0.136" bolt face depth AKA a Type 2 6.8SPC bolt. The bolt carrier group available for purchase with this upper assembly has a Type 2 bolt matched to this barrel.
  • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
  • 15" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
  • 0.750" Low Profile Gas Block.
  • Rifle Length Gas System.
  • Mil-Spec A2 Flash Hider with crush washer.

Options:

  • AR15parts will customize (to your specificaions in the drop down menu) your AR15 upper with the Rail Type (M-LOK or KEYMOD), a Magazine or two, one of our High Quality Bolt Carrier Groups, and your choice of 5 different Charging Handles.

This upper assembly will fit all standard AR15 lower receivers.

This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

Full Description
Current Stock:
Rail Type *
Muzzle Device *
Magazine
Bolt Carrier Group
Charging Handle
Qty
  • Description

    20" 6.8 SPC Stainless Heavy Contour Barrel AR15 Rifle Upper Assembly with 15" Rail and A2 Flash Hider

    The 6.8mm SPC was designed to address the deficiencies of the ballistics of the 556 NATO cartridge currently in service with the armed forces of all NATO-aligned countries.  The cartridge was the result of the Enhanced Rifle Cartridge Program. The 6.8 SPC was initially developed by Master Sergeant Steve Holland and Chris Murray, a United States Army Marksmanship Unit gunsmith, to offer superior downrange lethality over the 5.56 NATO/.223 Remington in an M16-pattern service rifle with minimal loss of magazine capacity and a negligible increase in recoil. The goal was to create a cartridge that would bridge the gap between 5.56 mm and 7.62mm.

    Specifications:

    • 20" 6.8 SPC 416R Stainless Heavy Contour Barrel with 1x8 Twist and 5/8x24 Threads. The chamber of this barrel conforms to SAAMI specs for 6.8 SPC. The barrel is machined for a 0.136" bolt face depth AKA a Type 2 6.8SPC bolt. The bolt carrier group available for purchase with this upper assembly has a Type 2 bolt matched to this barrel.
    • Mil-Spec Upper Receiver forged from 7075 T6 aluminum with forward assist and dust cover assembly installed. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
    • 15" Narrow Profile Free Float Rail machined from 6061 T6 aluminum. Very comfortable and very light weight. Your choice of M-LOK or KEYMOD attachment points along the entire length at 3, 6, and 9 positions. Hard coat anodized MIL-STD 8625 Type 3 Class 2.
    • 0.750" Low Profile Gas Block.
    • Rifle Length Gas System.
    • Mil-Spec A2 Flash Hider with crush washer.

    Options:

    • AR15parts will customize (to your specificaions in the drop down menu) your AR15 upper with the Rail Type (M-LOK or KEYMOD), a Magazine or two, one of our High Quality Bolt Carrier Groups, and your choice of 5 different Charging Handles.

    This upper assembly will fit all standard AR15 lower receivers.

    This item is "Firearm Parts", not a complete firearm (no serialized components). It will be shipped directly to you with no FFL transfer required.

    You are responsible for knowing federal, state and local laws applicable to this item. AR15Parts.com reserves the right to not ship to addresses where it may not be legal to own this item.

  • Reviews

    Reviews

    Jarrod Cook

    Very accurate!

    Perfect fit, right tolerance! Accurate right out the box! Super fast shipping! Thanks!
    Brett Basler

    Great upper

    Upper looks great, fit perfectly to my lower and the accuracy is fantastic! Shot sub-MOA with factory hornady SST and American eagle FMJs. No complaints what so ever.
    MJenner

    Great project build

    Took a chance based on a bunch of reviews on-line reviews. The upper assembly is excellent and mated perfectly to a Tactical Machining 80% Lower.
    Brian Aber

    6.8 SPC Upper 20"

    The price was great. I was surprised on how great the upper was. It's exactly what I was looking for. Beautiful stainless steel and perfect rail system. The muzzle break was the icing on the cake...
    Anthony Johnson

    6.8 upper

    Would buy again ...easy trans action and great quality.
    Brian Alioto

    6.8 upper purchase

    Very happy item is actually much better quality than I anticipated. UPS cost me an extra 1-2 days certainly not a deal breaker Stainless bull barrel, muzzle brake, and bolt carrier group are clean as can be
    Lonnie Kessler

    Great product

    The hand guard is shorter than it looks in the picture, but everything besides that is as advertised, very happy with this purchase.
    Roddie Stewart

    20" 6.8 SPC II upper

    Upper arriver on time with no damage .installed to my lower with no problem .Is better than expected .
    Chris Myers

    Just as expected

    Looks great! Fit and finish are nice. Price point was very reasonable. Can't wait to get the rest of my parts in so I can go shooting
    David Areheart

    Review

    This purchase is everything I expected it to be. Great job on your part!
  • Details

    Details

    Current Stock:
    SKU: UA68S20SS11HC24R_15ML00_A2
    Availability: Usually Ships in 24 Hours
    Old SKU: 2068SSU1x11EXRL