450 Bushmaster Barrels for Sale
AR15Parts.com offers 450 Bushmaster barrels for AR-15 builders planning a straight-wall, big-bore hunting upper. Compare barrel length, material, finish, twist rate, gas system, and muzzle threads, then match the bolt, magazines, and upper parts to the exact listing. Call (888) 706-0633 or use our contact form with fitment questions before you order.
Start with the barrel that fits your 450 Bushmaster hunting build.
450 Bushmaster Barrels for AR-15 Builds
The 450 Bushmaster is a straight-walled cartridge that fires a heavy .45-caliber projectile, with the product listings at AR15Parts.com noting 250+ grain bullets. It is popular with hunters who want a big-bore AR-15, and it gets extra attention in states that restrict hunting cartridges. Hunting rules change by state, season, and property, so always check current regulations for the place you plan to hunt before choosing a cartridge or ammunition.
What Makes a 450 Bushmaster Barrel Different
A 450 Bushmaster barrel installs on an AR-15 upper receiver, but it will not run with standard 5.56 parts. Each current listing states that you will need a .450 Bushmaster specific bolt carrier group and magazines. Confirm your bolt and magazines are made for 450 Bushmaster before assembly.
Every 450 Bushmaster barrel currently listed uses a heavy profile and a 0.875-inch gas-block journal, with SOCOM feed ramps. These details affect gas-block selection, handguard clearance, and front-end weight, so plan the rest of the upper around them. The current listings also use slow 1:24 or 1:20 twist rates, which set this barrel apart from typical small-bore AR-15 barrels.
Barrel Build or Complete Upper
A standalone barrel is the builder route. It works well if you already have an upper receiver and handguard or want to choose each part yourself. Current brands in this category are AR15Parts.com and Satern Barrels. Compare them side by side in our AR barrels catalog.
If you would rather start with the bolt and other upper components matched for you, review our 450 Bushmaster complete uppers. Confirm the listed configuration and lower receiver compatibility before pairing any complete upper with your lower.
Our 450 Bushmaster Barrel Options
Choose the route that fits your hunting build, then use the individual product listing to verify every dimension before ordering.
16-Inch 450 Bushmaster Barrels
The 16-inch length is offered in both a parkerized 4150 chrome moly barrel from AR15Parts.com and a 416R stainless barrel from Satern Barrels. A 16-inch barrel is a good fit for a handy hunting rifle that is easier to carry through brush or handle from a blind. Note that these two 16-inch barrels differ in twist, gas length, and muzzle threads, so compare the listings closely.
18-Inch 450 Bushmaster Barrels
The 18-inch length is offered in 416R stainless from Satern Barrels. It adds length for builders who want a longer rifle configuration and do not mind a little more weight up front.
Complete 450 Bushmaster Uppers
A complete upper cuts down the number of separate fitment decisions. Our 450 Bushmaster complete uppers give hunters a route with the barrel, receiver, gas system, and handguard already selected. Review each listing for barrel length, included bolt components, and muzzle setup, and confirm compatibility with your lower receiver.
450 Bushmaster Barrel Components and Build Parts
A 450 Bushmaster barrel still needs a 450 Bushmaster bolt carrier group, 450 Bushmaster magazines, a gas block for the 0.875-inch journal, the correct carbine or mid-length gas tube, a handguard that clears the heavy profile, and a muzzle device that matches the thread pitch. If you are unsure about any part, call (888) 706-0633 with the part numbers before ordering.
What to Look For in a 450 Bushmaster Barrel
The current listings differ in length, material, twist, gas system, and muzzle threads. Here is how to compare them.
Barrel Length and Intended Use
AR15Parts.com currently lists 450 Bushmaster barrels in 16-inch and 18-inch lengths. Think about where and how you hunt. A shorter barrel is easier to carry in tight cover, while a longer barrel suits builders who prefer a longer rifle and can accept the added weight.
Barrel Profile
All current 450 Bushmaster barrels use a heavy profile. A heavy profile adds weight, which slows heat buildup and can help soften the felt recoil of a big-bore cartridge. Make sure your handguard's inside diameter clears the barrel and the gas block.
Material and Finish: Parkerized vs. Stainless
Two material and finish options appear on the current 450 Bushmaster listings.
- 4150 chrome moly, parkerized: The 16-inch AR15Parts.com barrel. 4150 chrome moly is a chrome-moly steel used in many rifle barrels, and the parkerized finish provides exterior corrosion protection.
- 416R stainless, stainless finish: The 16-inch and 18-inch Satern Barrels options. 416R stainless resists corrosion at the steel level and is often chosen for machinability and precision-oriented builds.
Both are practical choices for a hunting rifle. Choose based on your field conditions, cleaning routine, and build budget.
Twist Rate
The parkerized 16-inch barrel uses a 1:24 twist, and the Satern stainless barrels use a 1:20 twist. Large-diameter, relatively short bullets do not need the fast twist rates common on small-bore AR-15 barrels. If you plan to shoot a specific bullet weight or construction, check the ammunition maker's recommendation against the listed twist on the individual product page.
Gas System and Gas-Block Journal
Gas length varies across the current listings. The 16-inch parkerized barrel uses a carbine-length gas system, while the 16-inch and 18-inch Satern stainless barrels use a mid-length gas system. Your gas tube must match the barrel you choose. Do not pick a tube by barrel length alone, because two 16-inch barrels in this category use different gas lengths. The gas-block journal is 0.875 inches on every current listing.
Muzzle Threads
Muzzle threads also vary. The AR15Parts.com parkerized barrel is threaded 5/8x32, and the Satern stainless barrels are threaded 3/4x24. These are not interchangeable, so your brake, flash hider, or suppressor mount must match the exact thread on your barrel and be suited to a .45-caliber bore.
Not sure which barrel fits your build? Ask our team by phone or contact form.
Why Choose AR15Parts.com
Trusted Firearms Parts Retailer
Call (888) 706-0633 or reach out through our contact form to talk through your 450 Bushmaster build if you need help sorting out barrel, bolt, magazine, gas, handguard, or muzzle-device specifications before you buy.
Build-Focused Product Selection
Build comparison: AR15Parts.com supplies firearms, parts, and accessories nationwide. Compare component barrels from AR15Parts.com and Satern Barrels, complete uppers, and supporting parts to decide how much of the build you want to assemble yourself.
Configuration details: Each 450 Bushmaster listing shows length, profile, material, finish, twist, thread, gas-block journal, gas length, and feed ramps, so you can compare options on real details instead of assumptions.
Direct Help Before You Order
Listing questions: Call (888) 706-0633 if you need help reading a product description, comparing a component barrel with a complete upper, or checking which specifications need to match the parts you already own.
Our Process
Start with the hunt you have in mind, then confirm each listed fitment detail before placing an order.
1. Define the Hunt
Decide where and how you will carry the rifle. That choice narrows barrel length between the 16-inch and 18-inch options before you compare individual products.
2. Pick Your Material
Decide between parkerized 4150 chrome moly and 416R stainless, then note the twist rate that comes with each listing.
3. Match the Gas and Muzzle Parts
Note the gas length, carbine on the parkerized 16-inch barrel and mid-length on the Satern stainless barrels. Note the thread pitch, 5/8x32 on the parkerized barrel and 3/4x24 on the Satern barrels, and pick a gas block for the 0.875-inch journal.
4. Get the Right Bolt and Magazines
Use a .450 Bushmaster specific BCG and magazines, as each listing states. If you would rather skip the parts matching, compare our 450 Bushmaster complete uppers before ordering separate components.
Confirm your barrel and upper-component fitment before you order. Call (888) 706-0633 for product questions.
Denison, TX Service Areas
Our team is based at 4000 Texoma Pkwy, Denison, TX, 75020, and we help builders in Denison, Sherman, Pottsboro, the Lake Texoma area and nationwide by phone and online. Along with Texas builders shopping for 450 Bushmaster barrels, complete uppers, and related AR-15 parts, you can call (888) 706-0633 or use our contact form if you have a listing or compatibility question.
Buyers can compare barrel lengths, gas-system lengths, twist rates, materials, and finishes in the product descriptions before selecting components. You can also browse the full AR barrels catalog to compare 450 Bushmaster against other calibers.
Choose the Right 450 Bushmaster Barrel for Your Build
Before checkout, run through this list for the exact barrel you picked.
Final Compatibility Checklist
- Verify 450 Bushmaster chambering and your chosen length, 16 or 18 inches.
- Match the gas tube to the listed gas length, carbine or mid-length.
- Use a gas block sized for the 0.875-inch journal.
- Match your muzzle device to 5/8x32 or 3/4x24, depending on the barrel.
- Confirm the handguard clears the heavy profile and gas block.
- Use a .450 Bushmaster specific BCG and magazines.
For a more complete setup with fewer fitment checks, see our 450 Bushmaster complete uppers.
Send your barrel choice and parts list through our contact page, or call (888) 706-0633 to confirm fitment before you order.
Frequently Asked Questions
What Barrel Length Is Best for 450 Bushmaster?
It depends on how you hunt. AR15Parts.com currently lists 450 Bushmaster barrels in 16-inch and 18-inch lengths. A 16-inch barrel keeps the rifle shorter and handier in brush, from a stand, or in a blind. An 18-inch barrel adds length and a bit of weight for hunters who prefer a longer rifle. Actual velocity depends on ammunition and barrel, so do not expect a fixed gain from any length change.
Is a Stainless or Parkerized 450 Bushmaster Barrel Better for Hunting?
Neither is universally better. The 416R stainless Satern barrels resist corrosion at the steel level, which helps in wet or humid conditions. The parkerized 4150 chrome moly barrel relies on its exterior finish for corrosion protection and is a practical option for a working hunting rifle. Match your choice to your climate, storage, and cleaning habits.
Do I Need a Special Bolt and Magazines for a 450 Bushmaster Barrel?
Yes. Each 450 Bushmaster barrel listed at AR15Parts.com states that you will need a .450 Bushmaster specific BCG and magazines. A standard 5.56 bolt and standard 5.56 magazines are not the correct match. Our 450 Bushmaster complete uppers list their included bolt components, which can simplify the build.
What Twist Rate Do 450 Bushmaster Barrels Use?
The 450 Bushmaster barrels currently listed at AR15Parts.com use a 1:24 twist on the parkerized 16-inch barrel and a 1:20 twist on the Satern stainless barrels. Both are slow twists meant for heavy .45-caliber bullets. Check your ammunition maker's guidance for the loads you plan to shoot.
Why Is 450 Bushmaster Popular for Deer Hunting?
It is a straight-walled cartridge that fires a heavy .45-caliber bullet from an AR-15, and some states restrict rifle hunting in certain areas to straight-wall cartridges. Rules vary by state, season, and property, so always confirm current regulations for where you plan to hunt before choosing a cartridge or ammunition.
What Gas Block and Muzzle Device Fit a 450 Bushmaster Barrel?
All current 450 Bushmaster barrels use a 0.875-inch gas-block journal, so choose a gas block with that inside diameter. Muzzle threads vary: 5/8x32 on the parkerized barrel and 3/4x24 on the Satern barrels. Match your device to the exact listing. Questions? Contact AR15Parts.com or call (888) 706-0633.
3 Products
